FJW-84499C-5
Optical System
OTG-IM
Imaging Module
Opto's compact imaging modules achieve sub-micron resolutions and are each optimized for specific applications. They do not require calibration and come already with integrated illumination (coaxial & ring light) and comprehensive software at a maximum field of view of 307x230 mm².
RES-CM-Pika-UV
Pika UV - Near Ultraviolet Hyperspectral Imaging Camera
The unique near-ultraviolet hyperspectral imaging camera Resonon Pika NUV2 can measure visible and NUV light from 330 - 800 nm
ADM-CK-Neo
High End Spectrometer Neo
DAT-BeamMAP
Multi Plane Scanning System BeamMap
Based on the patented multi plane scanning technology the scanning system the BeamMap allows the measurement of focal position, beam diameter (according to ISO 11146), divergence and the M2 factor of different focussed cw or qcw laser beams in real time.
DAT-BeamR2
BeamR, rot. Single Plane Scan
The scanning system BeamR with rotating slots for the measurement of lasers with diameters of 0.5 microns to about 3 mm
DAT-BMR-LP
Lensplate for BeamMap2 and BeamR2
This adapter plate is also available for the Beam Profiler BeamMap and BeamR 1st generation.
DAT-Expander
Agrandisseur de faisceaux Laser
DAT-M2DU-BR2
Banc de mesure automatique de M2
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.