Lab and production measurement technology

Lab and production measurement technology



Fiber Phase Shifter

GPC-FPS-003

The FPS-003 all fiber phase shifter/modulator combines a wide modulation bandwidth (up to 60 kHz) with low half-wave voltages to create a long-range device that can be driven by standard function generators.
Optical Coherence Domain Reflectometer - InsideView™ OCDR-1000

GPC-OCDR-1000

InsideView(TM) is an optical coherence domain reflectometer (OCDR- 1000) designed to obtain space-resolved reflection information inside a fiber optical component, such as a Photonic Integrated Circuit (PIC), for diagnosing quality or design issues.

OEM Balanced Detector

GPC-BPD-003

OCT- und Sensorsysteme erfordern hochleistungsfähige ausgewogenePhotodetektoren, um das Signal-Rausch-Verhältnis des Systems zu verbessern. Die BPD-003 wurde speziell für OEM-Anwendungen in solchen Bereichen entwickelt, die auf niedrige Kosten und geringe Größe sowie hohe Leistung ausgelegt sind.
PMD and PDL Calibration Standards

GPC-CS-DGD/PDL/SOPMD

PMD and PDL are important considerations in many applications, especially high data-rate communications. With the development of high precision test equipment and tighter-tolerance systems, a need has arisen for extremely precise calibration standards.
Back to top

Popular Products

laser2000_dataray_wincamd-lcm_usb3_beam_profiler_mws_3011_crop.png

DAT-WinCamD-LCM

This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.

dat-wincamd-fir-8-14hr.jpg

DAT-WinCamD-IRBB

The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.

Laser Beam Profiler WinCamD-QD-1550

DAT-WinCamD-QD-1550

This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
Laser beam profile measurements for industrial applications

DAT-ILMS

DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.

dat-wincamd-m2_pfad.jpg

DAT-M2DU

A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.