GPC-OFA-1000
Dynamic Optical Frequency Analyzer - ChirpWise(TM)
The OFA-1000, a novel optical frequency analyzer specifically designed to characterize dynamic spectral properties of tunable lasers
Network Technology
Gerätekalibrierung
Device calibration
Laser 2000 attaches great importance to the optimal care of your request. Experienced employees are available at Laser 2000. The calibration for fiber optic measurement technology, OTDR, LAN or protocol measurement technology is now offered by us across all manufacturers.
GGL-400G-Transceiver
Gigalight - Ethernet Transceiver - 400G
Gigalight's 400G Transceiver-Module enables 400G Ethernet over short and medium range distances for Data-Center, Metro-Data Center Interconnect und Metro-Applications
CUT-FMC-10/100i
Convertisseur de Média CTCU 10/1
Le CUT-FMC-10/100i est un convertisseur de media Cuivre vers Fibre Optique autonome 10/100Mbps Base-T Ethernet vers 100Mbps Base-FX disponible en version AC ou DC
CUT-FMC-1000MS
Convertisseur de Média CTCU 10/1
Le convertisseur de média CUT-FMC-1000MS est un convertisseur Gigabit Ethernet 10/100/1000Mbps vers 100/1000Base-X, manageable via une interface Smart Web OAM In Band.
CUT-FMC-1000S
Convertisseur de Média CTCU 10/1
Le Convertisseur de Média CUT-FMC-1000S est une solution autonome idéale pour réaliser un changement d'interface Fibre Optique vers réseau Cuivre. Proposant un port SFP 100/1000Mbps, ce convertisseur répond à la grande majorité des problématiques de conve
CUT-FRM220-10GE-TS
Convertisseur de Média CTCU FRM2
Le CUT-FRM220-10GE-TS est un convertisseur de média Ethernet cuivre vers fibre 10Gbps IEEE802.3an et IEEE802.3ae.
CUT-FRM220-CH08
Plateforme Multiservice 8 slots
La plateforme CUT-FRM220-CH08 est un châssis 1U de 8 slots permettant de gérer plusieurs modules de conversion de médias, avec alimentation redondante et hot-swappable.
CUT-FRM220-CH20
Plateforme Multiservice 20 slots
La plateforme CUT-FRM220-CH20 est un châssis de 20 slots permettant la gestion des modules de conversion de médias, avec alimentation redondante et hot-swappable.
CUT-IMC-100
Convertisseur de Média Industrie
Les convertisseurs Fibre Optique CUT-IMC-100 sont des convertisseurs de média Fast Ethernet non manageables, qui supportent la conversion entre une interface cuivre 10/100Base-TX et une interface fibre optique 100Base-FX Ethernet.
GPC-DVS-1000
Distributed Vibration Sensor - OptiEar™
The DVS-1000 is a versatile distributed vibration sensor system, capable of monitoring both buried installations (pipelines, borders, optical cables, etc.) and above ground fence and wall mounted systems.
GPC-OIS-1000
3D Optical NDE System
The OIS-1000, also known as the Acute Detection for Advanced Materials (ADAM™) system, is a high speed, high resolution 3D optical non-destructive evaluation (NDE) system for the inspection of advanced materials.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
