Reference number: LMT-ACTIVE-WINDOW
Laser Safety Window - Failsafe safety system that enables high powered lasers to be switched off virtually immediately if the laser beam inadvertently strikes the window.
Need more info?
Contact our expert.
Our Team
Description
Usually fitted into the panels or doors of the Laser Castle (Laser Safety Cabin), Glaser Jailer (laser safety window) is connected to the interlock control system to enable laser welding operations to be viewed safely from outside the cabin.
This enables multi-kilowatt lasers (up to 10 kW) used for welding, cutting and cladding to be made safe, preventing harm to personnel and preventing damage to surrounding infrastructure. The laser safety window is suitable for all laser powers, wavelengths and waveforms.
Integrated into Lasermet's Laser Jailer active laser guarding system, the laser safety window provides a complete active solution. Currently in operation worldwide, this revolutionary active, patented technology is already tested and proven.
Glaser Jailer laser safety windows are constantly monitored by the interlock control system when the laser is in operation. A direct hit by a powerful laser will cause the window to activate the interlock controller which then turns the laser off. This failsafe technology isolates the laser safety input in less than 50 milli-seconds.
The window should be replaced following a direct hit, but only following an investigation into the cause of the direct hit and when corrective measures have been taken to prevent it happening again.
Those products may also interest you
Laser Safety Window - Failsafe safety system that enables high powered lasers to be switched off virtually immediately if the laser beam inadvertently strikes the window.