Lab and production measurement technology
PMD and PDL are important considerations in many applications, especially high data-rate communications. With the development of high precision test equipment and tighter-tolerance systems, a need has arisen for extremely precise calibration standards.
General Photonics phase shifter produces phase shifts up to 15 pi at modulation frequencies from DC to 20 kHz.
GPCs’ 2nd generation all fiber phase shifter/modulator provides phase shifts up to 65π with a much lower half-wave voltage (~2 volts as compared with 10-20 volts for the 1st generation phase shifter) at frequencies from DC to 20 kHz
Generating programmable time delay from nanoseconds to milliseconds is important for various applications ranging from data center testing to wireless communications to radar, optical communications, and measurement systems.
The OFA-1000, a novel optical frequency analyzer specifically designed to characterize dynamic spectral properties of tunable lasers
The DVS-1000 is a versatile distributed vibration sensor system, capable of monitoring both buried installations (pipelines, borders, optical cables, etc.) and above ground fence and wall mounted systems.
The OIS-1000, also known as the Acute Detection for Advanced Materials (ADAM™) system, is a high speed, high resolution 3D optical non-destructive evaluation (NDE) system for the inspection of advanced materials.
The DOP-201 measures and displays the Degree of Polarization Meter (DOP) of a light source in real time on the front panel display.
The FST-001-B Fiber Stretcher is a piezo-driven fiber stretcher with an optical delay range of up to 3 mm.
The POD-101D is a DSP (digital signal processor) powered in-line polarimeter specially designed for high-speed polarization analysis and monitoring.
The POL in-line polarizer consists of a high-ER micro-polarizer in a stainless steel cylinder.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.