GPC-OCT-series
OCT (Optical Coherence Tomography) Equipement
Here is a quick overview of the OCT (Optical Coherence Tomograhphy) testers from OCTPRO.
Capteurs fibres
Capteurs fibres
La technologie des capteurs à fibres optiques est l'un des domaines clés de la technologie des capteurs. Les fibres optiques modernes ouvrent de plus en plus de nouvelles applications dans le domaine de la technologie des capteurs et de l'éclairage. Au cours des dernières années, les capteurs à fibres optiques basés sur des réseaux de Bragg intégrés, en particulier, ont été fréquemment utilisés pour les mesures de température et de déformation. L'utilisation de la technologie laser pour la fonctionnalisation des surfaces d'extrémité des fibres et l'optimisation de la construction des fibres et de la technologie de liaison des fibres ouvre un large éventail de possibilités de conception. Par exemple, les fibres sur la surface de l'enveloppe pourraient être structurées de manière ciblée à l'aide de faisceaux laser afin d'utiliser la lumière découplée pour des applications d'éclairage ou pour coupler des signaux dans la fibre.
GPC-FPS-001
Fiber Phase Shifter - FPS-001
General Photonics phase shifter produces phase shifts up to 15 pi at modulation frequencies from DC to 20 kHz.
GPC-FPS-002
Fiber Phase Shifter
GPCs’ 2nd generation all fiber phase shifter/modulator provides phase shifts up to 65p with a much lower half-wave voltage (~2 volts as compared with 10-20 volts for the 1st generation phase shifter) at frequencies from DC to 20 kHz
GPC-FPS-003
Fiber Phase Shifter
The FPS-003 all fiber phase shifter/modulator combines a wide modulation bandwidth (up to 60 kHz) with low half-wave voltages to create a long-range device that can be driven by standard function generators.
GPC-FST-001
Fiber Stretcher
The FST-001-B is a piezo-driven fiber stretcher with a long optical delay range of up to 3 mm. The device comes complete with a piezo driver packaged in a user-friendly small enclosure.
GPC-BPD-002
Balanced Photodetector
OCT and sensor systems require high performance balanced photodetectors to increase system signal to noise ratio. The BPD-002 is specially designed for use in research and development, with ease of use and high performance as the primary design goals.
GPC-BPD-003
OEM Ausgewogener Detektor
OCT- und Sensorsysteme erfordern hochleistungsfähige ausgewogenePhotodetektoren, um das Signal-Rausch-Verhältnis des Systems zu verbessern. Die BPD-003 wurde speziell für OEM-Anwendungen in solchen Bereichen entwickelt, die auf niedrige Kosten und geringe Größe sowie hohe Leistung ausgelegt sind.
GPC-PBPD-001
Polarization Diverse Balanced Photodetector
OCT and sensor systems require high performance balanced photodetectors to increase system signal to noise ratio. Polarization sensitive OCT and similar applications require separate analysis of the two polarization components of a signal. The PBPD-001 is specially designed for use in such systems.
GPC-PDD-001
Polarization Diversity Detector
Simultaneously detecting the powers of two orthogonal polarization components is important for many sensor and measurement applications. A pigtailed polarization beam splitter coupled with two photodetectors can be used for such applications; however, this arrangement is bulky, troublesome to handle, and costly.
Produits populaires
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 µm to 16 µm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay´s ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
