Capteurs fibres
Capteurs fibres

La technologie des capteurs à fibres optiques est l'un des domaines clés de la technologie des capteurs. Les fibres optiques modernes ouvrent de plus en plus de nouvelles applications dans le domaine de la technologie des capteurs et de l'éclairage. Au cours des dernières années, les capteurs à fibres optiques basés sur des réseaux de Bragg intégrés, en particulier, ont été fréquemment utilisés pour les mesures de température et de déformation. L'utilisation de la technologie laser pour la fonctionnalisation des surfaces d'extrémité des fibres et l'optimisation de la construction des fibres et de la technologie de liaison des fibres ouvre un large éventail de possibilités de conception. Par exemple, les fibres sur la surface de l'enveloppe pourraient être structurées de manière ciblée à l'aide de faisceaux laser afin d'utiliser la lumière découplée pour des applications d'éclairage ou pour coupler des signaux dans la fibre.



General Photonics phase shifter produces phase shifts up to 15 pi at modulation frequencies from DC to 20 kHz.

GPC-FPS-002

GPCs’ 2nd generation all fiber phase shifter/modulator provides phase shifts up to 65p with a much lower half-wave voltage (~2 volts as compared with 10-20 volts for the 1st generation phase shifter) at frequencies from DC to 20 kHz

GPC-FPS-003

The FPS-003 all fiber phase shifter/modulator combines a wide modulation bandwidth (up to 60 kHz) with low half-wave voltages to create a long-range device that can be driven by standard function generators.

GPC-FST-001

The FST-001-B is a piezo-driven fiber stretcher with a long optical delay range of up to 3 mm. The device comes complete with a piezo driver packaged in a user-friendly small enclosure.
OCT and sensor systems require high performance balanced photodetectors to increase system signal to noise ratio. The BPD-002 is specially designed for use in research and development, with ease of use and high performance as the primary design goals.
OCT- und Sensorsysteme erfordern hochleistungsfähige ausgewogenePhotodetektoren, um das Signal-Rausch-Verhältnis des Systems zu verbessern. Die BPD-003 wurde speziell für OEM-Anwendungen in solchen Bereichen entwickelt, die auf niedrige Kosten und geringe Größe sowie hohe Leistung ausgelegt sind.
OCT and sensor systems require high performance balanced photodetectors to increase system signal to noise ratio. Polarization sensitive OCT and similar applications require separate analysis of the two polarization components of a signal. The PBPD-001 is specially designed for use in such systems.
Simultaneously detecting the powers of two orthogonal polarization components is important for many sensor and measurement applications. A pigtailed polarization beam splitter coupled with two photodetectors can be used for such applications; however, this arrangement is bulky, troublesome to handle, and costly.