LMT-LS-20-24
Laser beam shutter up to 20W
Air-cooled laser safety shutter for up to 20 W of optical power
Shutters
Shutters
Shutters are optical locks that block the beam path in the event of unauthorized access and thus prevent laser radiation from leaving the laser environment uncontrolled. The laser shutters either absorb the entire laser power or direct it into an external beam dump using a mirror. The shutter can be manually operated and integrated into the safety circuit of an interlock control system.
LMT-LS-20SIL-24
Laser Shutter up to 20 W, SIL3
The laser shutter LMT-LS-20SIL-24 is suitable for all kinds of laser.
LMT-LS-10-12
beam shutter up to 20 W, 12 VDC
Air-cooled safety shutter with a beam trap (beam dump) laser to 20 W optical power.
EOP-SH-X-O
Laser Safety (Interlock) Shutters
The laser safety shutter SH Series is ideally suited as an OEM component for low-cost switching and modulating laser radiation. A number of variations are possible, or customized available for larger quantities.
LMT-LS-200
Obturateur Sécurité Laser 200W
Cet obturateur de sécurité Laser est refroidi par air et intègre un piège de lumière (Beam dump). Dédié au laser d?une puissance moyenne de 200W
LMT-LS-Overview
Obturateurs de sécurité Laser
Les obturateurs de sécurité laser sont utilisés pour bloquer le faisceau laser, si au cours d?une application, la sécurité n?est plus assurée dans une pièce.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
