Material: Soda Lime GlassWavelength Range [nm]: 400-700
Filtres
Filters
!shop!_Type
- Autres
!shop!_Gamme de longueurs d`onde en nm
!shop!_Gamme de longueurs d`onde en nm
Filtres
Les filtres optiques sont utilisés pour sélectionner le spectre souhaité d'un faisceau lumineux. Cela peut être nécessaire pour différentes conditions. Les filtres passe-bande sont fréquemment utilisés pour nettoyer le spectre après une source de faisceau ou avant un détecteur. Les filtres passe-bande, passe-court, passe-long, coupe-bande et coupe-bande ou séparateurs de faisceau se distinguent par leur conception.
It is fit for fluid observation, used as a light panel and laser markings system.
BK 7 Ground glass diffuser has a large area diffusion of and incident light.
SiO2 Ground glass diffuser has a large area diffusion of and incident light.
Longpass filter that cut the short wavelength and let the long wavelength transmit.
A filter that transmits a specific wavelength in the UV range and cuts the visible range.
A filter that transmits a specific wavelength at green from blu, and cuts off other wavelengths in the visible range.
A filter that transmits a specific wavelength at green from blu, and cuts off other wavelengths in the visible range.
This product is widely used for absorbing heat from halogen and xenon lights for experiments that need to avoid UV or heat from those lightings.
Produits populaires
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 µm to 16 µm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay´s ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
