A variable beam splitter can be used to change the angle of incidence of a laser.
Optique et revêtements optiques
Cristaux optiques Haute Précision personnalisables
OptoNano microscope with high resolution by optical microsphere nanoscopy, CMOS camera with 5M pixel, motorized XY stage, transparent LED illumination stage and coaxial illumination.
Halbspiegel haben ein gleichmäßiges 1:1-Verhältnis von Reflexion und Transmission sowohl bei linear polarisiertem Licht als auch bei normaler Lichtquelle.
Harmonic separators are used to separate certain YAG harmonics from other harmonics.
A beam sampler behaves like a plate beam splitter, it has the ability to reflect approximately 5.2% of the total beam.
The Polka Dot beam splitter has an aluminum coating of grid dots (polka dots) on the glass substrate.
Square, AR, Doping (at.): 5% or 10%, A: 5 mm or 10 mm, t: 2 - 5 mm
Square, BR, Doping (at.): 5% or 10%, A: 5 mm or 10 mm, t: 2 - 5 mm
Produits populaires
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 µm to 16 µm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay´s ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
