These substrates are mainly used as the primary mirror in a reflecting telescope or as reflection mirror of a collimating optical system light-source.
Filters
!shop!_Type
- Miroirs concaves en aluminium - Miroirs plats argentés - Miroirs à ligne laser
!shop!_Type
!shop!_Coating
!shop!_Coating
Mirroirs
These substrates are mainly used as the primary mirror in a reflecting telescope or as reflection mirror of a collimating optical system light-source.
Silver (Ag) coated mirrors have a high reflectance over a wide range from visible to infrared wavelengths.
These laser mirrors are designed for laser applications with specific wavelengths, where low wavefront distortion, low scattering and high reflectivity are usually important.
All dielectric coating designs are much more resistant to laser damage than typical mirrors and are suitable for use with high-power laser systems.
Produits populaires
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 µm to 16 µm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay´s ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
