Mirrors with high surface accuracy are realized by optimizing the conditions of substrate, thickness and coating.
Frameless mounting is designed to minimize the product footprint and maximize the front surface area of the mirror used.
This mirror has negative dispersion and can be used for pulse compression in a femtosecond laser system.
The super mirror is an ultra-high power mirror whose surface reflectance is as close to 1 (100%) as possible to increase the power of the resonator.
Dieser Spiegel ist so konzipiert, dass er eine geringe Wellenlängendispersion aufweist, die für die Verwendung mit Ultrakurzpulslasern mit 100 Femtosekunden oder weniger geeignet ist.
This mirror is designed to have a low wavelength dispersion suitable for use with ultrashort pulse lasers of 100 femtoseconds or less.
These laser mirrors are designed for laser applications with specific wavelengths, where low wavefront distortion, low scattering and high reflectivity are usually important.
You can use the 0 - 45° wide-angle dielectric mirrors for an optical system to move light back and forth between two mirrors or Michelson interferometers if you want to use a mirror with an angle of incidence of 45° or less.
All dielectric coating designs are much more resistant to laser damage than typical mirrors and are suitable for use with high-power laser systems.
Ultra-wideband dielectric mirrors are fabricated using pure dielectric multilayer coatings of alternating high and low index layers.
This mirror has negative dispersion and can be used for pulse compression in a femtosecond laser system.
Produits populaires
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 µm to 16 µm.
DataRay´s ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
