Multiple Quantum Well (MQW) Distributed Feedback (DFB) Laser Design.
Filters
Type
- Diodes laser - Éclairage
Emetteurs-récepteurs
Multi-Quantum Well (MQW) Fabry-Perot (FP) laser for low cost transmitters up to 2.5Gbps
1310 nm coaxial FP laser for 2.5 Gbps applications
Multi-Quantum Well (MQW) Distributed Feedback (DFB) Laser for analog application
Multi-Quantum Well (MQW) distributed feedback (DFB) laser for analog applications
Multi-Quantum Well (MQW) distributed feedback (DFB) laser for analog applications
Multi-Quantum Well (MQW) distributed feedback (DFB) laser for analog applications.
Multi-Quantum Well (MQW) distributed feedback (DFB) laser for analog applications.
DFB laser modules for forward-path CATV applications.
Multi-Quantum Well (MQW) Fabry-Perot (FP) Laser
OCT and sensor systems require high performance balanced photodetectors to increase system signal to noise ratio. The BPD-002 is specially designed for use in research and development, with ease of use and high performance as the primary design goals.
Produits populaires
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 µm to 16 µm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay´s ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
