Corner cubes have the property that light incident on the prism face is deflected 180 degrees regardless of its angle of incidence.
Filters
!shop!_Type
- Prismes à bords tranchants - Rétro-réflecteurs
Prismes
The knife-edge prism is polished on the sharp edges of the rectangular faces and has no chamfers on these edges.
The knife-edge prism is polished on the sharp edges of the rectangular faces and has no chamfers on these edges.
The hollow retroreflector is similar to the corner cube; it reflects the incident light back to its original source.
Produits populaires
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 µm to 16 µm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay´s ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
