Filters
!shop!_Type
- Prismes dispersants équilatéraux - Prismes à bords tranchants - Rétro-réflecteurs
!shop!_Matériau
!shop!_Matériau
Prismes
Corner cubes have the property that light incident on the prism face is deflected 180 degrees regardless of its angle of incidence.
BK7 equilateral prisms are commonly used for splitting light into its different colors.
SiO2 equilateral prisms are commonly used for splitting light into its different colors.
S-TIH11 equilateral prisms are usually used for scattering the light into its different colors.
The knife-edge prism is polished on the sharp edges of the rectangular faces and has no chamfers on these edges.
The knife-edge prism is polished on the sharp edges of the rectangular faces and has no chamfers on these edges.
The hollow retroreflector is similar to the corner cube; it reflects the incident light back to its original source.
Produits populaires
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 µm to 16 µm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay´s ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.