Le store de protection laser est la solution idéale pour couvrir une fenêtre dans les laboratoires et dans l’industrie, dans lesquels un laser de classe 3B ou 4 est utilisé.
Sécurité laser
A fully adjustable stainless steel patient eyewear for close-to-the-eye aesthetic applications with a 0 % daylight transmission.
Laser safety glasses for Nd: YAG laser with interference filter glass and a daylight transmission of 18 %
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 10 %.
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 2 %.
The laser protection glasses and laser protection windows are especially suitable for UV lasers as well as blue and green lasers.
Obturateur avec piège optique dédié pour fonctionner avec un dispositif de norme SIL3 et pour application laser jusqu'à 20W
Laser safety glasses for Nd: YAG laser with interference filter glass and a daylight transmission of 70 %
Les cabines de sécurité laser sont conçues de manière à ce que, pour les applications avec des lasers de classe 4, l’environnement soit correctement protégé et remplisse les conditions de classe 1 selon la norme EN 60825-1 ou EN12254.
Laser safety goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 38 %.
Laser safety goggles for patients according to DIN EN 207 with glass filter and a daylight transmission of 40 %.
Lunettes d'alignement laser selon DIN EN 208 avec filtre en polycarbonate et transmission de la lumière du jour de 19%.
Produits populaires
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 µm to 16 µm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay´s ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
