This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
Profilage des faisceaux laser et mesure du M²
Filters
Surface du capteur [mm]
- 3 Ø
Surface du capteur [mm]
Profilage des faisceaux laser et mesure du M²
La qualité du rayonnement est souvent mentionnée dans le traitement des matériaux et la technologie de mesure. Selon l'application, la qualité est déterminée par la stabilité temporelle et locale de la puissance de sortie, la largeur du spectre de fréquence, la cohérence temporelle et locale et l'ampleur de la divergence du faisceau, qui est liée à la mesure dans laquelle le rayonnement peut être focalisé.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 µm to 16 µm.
DataRay´s ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
The beam profiling cameras BladeCam2-HR and BladeCam2-XHR combine an extremely compact design (housing depth of only 12.84 mm) with a very high resolution.
The combination of the WinCamD-IRBB and a PPBS provides a perfect solution for measuring high-power CO2 lasers.
Laser beam profiler with fiber optic taper for characterizing large laser beams up to 25 mm x 25 mm.
Produits populaires
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 µm to 16 µm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay´s ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
