Nicht-polarisierende würfelförmige Halbspiegel

Reference number: OSE-NPCH-10-2660

Halbspiegel haben ein gleichmäßiges 1:1-Verhältnis von Reflexion und Transmission sowohl bei linear polarisiertem Licht als auch bei normaler Lichtquelle.

Gamme de longueurs d`onde en nm

A - B - C en mm

Besoin de plus d'informations ?
Contactez notre expert.

Notre équipe

Besoin de plus d'informations ?
Contactez notre expert.

Description

Oberflächenebenheit des Substrats: &λ;/4
Strahlabweichung: 5
Beschichtung: Hypothenusenoberfläche; Dielektrische mehrlagige Beschichtung / Vier Flächen; Mehrlagige Antireflexbeschichtung
Einfallswinkel in °: 0
Divergenzverhältnis (Reflektionsvermögen:Durchlässigkeit): 1:1
Laserzerstörschwelle in J/cm2 (LIDT) : 0,3
Oberflächenqualität (Scratch-Dig): 20-10
Freie Apertur: Kreis im Quadrat, der 85% der Fläche des Quadrates entspricht

Ces produits pourraient vous intéresser

Hybrid Cube Half Mirrors

OSE-HBCH

195,40
Chromium Cube Half Mirrors

OSE-CSCH

83,10
Dielectric Cube Half Mirrors

OSE-CSMH

130,20
Ultra Broadband Dielectric Half Mirrors

OSE-PMH

415,10
Laser Line Plate Half Mirrors

OSE-PSMH-LL

594,30

Wavelength Range [nm]: 266
A=B=C [mm]: 10
Material: Synthetic fused sillica
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-2660-Average.xls

NPCH-2660-P-Polarization.xls

NPCH-2660-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 266
A=B=C [mm]: 15
Material: Synthetic fused sillica
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-2660-Average.xls

NPCH-2660-P-Polarization.xls

NPCH-2660-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 266
A=B=C [mm]: 20
Material: Synthetic fused sillica
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-2660-Average.xls

NPCH-2660-P-Polarization.xls

NPCH-2660-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 5
A=B=C [mm]: 10
Material: Synthetic fused sillica
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-3550-Average.xls

NPCH-3550-P-Polarization.xls

NPCH-3550-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 5
A=B=C [mm]: 15
Material: Synthetic fused sillica
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-3550-Average.xls

NPCH-3550-P-Polarization.xls

NPCH-3550-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 5
A=B=C [mm]: 20
Material: Synthetic fused sillica
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-3550-Average.xls

NPCH-3550-P-Polarization.xls

NPCH-3550-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 405
A=B=C [mm]: 10
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-4050-Average.xls

NPCH-4050-P-Polarization.xls

NPCH-4050-Sv.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 405
A=B=C [mm]: 15
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coating Four surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions (Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions (Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions (Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

NPCH.xls

NPCH-4050-Average.xls

NPCH-4050-P-Polarization.xls

NPCH-4050-Sv.xls

Opt_Prisms_.zip

Wavelength Range [nm]: 405
A=B=C [mm]: 20
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-4050-Average.xls

NPCH-4050-P-Polarization.xls

NPCH-4050-Sv.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 488
A=B=C [mm]: 10
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-4880-Average.xls

NPCH-4880-P-Polarization.xls

NPCH-4880-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 488
A=B=C [mm]: 15
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-4880-Average.xls

NPCH-4880-P-Polarization.xls

NPCH-4880-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 488
A=B=C [mm]: 20
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-4880-Average.xls

NPCH-4880-P-Polarization.xls

NPCH-4880-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 514.5
A=B=C [mm]: 10
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-5145-Average.xls

NPCH-5145-P-Polarization.xls

NPCH-5145-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 514.5
A=B=C [mm]: 15
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-5145-Average.xls

NPCH-5145-P-Polarization.xls

NPCH-5145-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 514.5
A=B=C [mm]: 20
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-5145-Average.xls

NPCH-5145-P-Polarization.xls

NPCH-5145-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 532
A=B=C [mm]: 10
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-5320-Average.xls

NPCH-5320-P-Polarization.xls

NPCH-5320-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 532
A=B=C [mm]: 15
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-5320-Average.xls

NPCH-5320-P-Polarization.xls

NPCH-5320-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 532
A=B=C [mm]: 20
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-5320-Average.xls

NPCH-5320-P-Polarization.xls

NPCH-5320-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 632.8
A=B=C [mm]: 5
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-6328-Average.xls

NPCH-6328-P-Polarization.xls

NPCH-6328-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 632.8
A=B=C [mm]: 10
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-6328-Average.xls

NPCH-6328-P-Polarization.xls

NPCH-6328-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 632.8
A=B=C [mm]: 15
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-6328-Average.xls

NPCH-6328-P-Polarization.xls

NPCH-6328-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 632.8
A=B=C [mm]: 20
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-6328-Average.xls

NPCH-6328-P-Polarization.xls

NPCH-6328-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 670
A=B=C [mm]: 10
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-6700-Average.xls

NPCH-6700-P-Polarization.xls

NPCH-6700-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 670
A=B=C [mm]: 15
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-6700-Average.xls

NPCH-6700-P-Polarization.xls

NPCH-6700-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 670
A=B=C [mm]: 20
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-6700-Average.xls

NPCH-6700-P-Polarization.xls

NPCH-6700-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 780
A=B=C [mm]: 10
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-7800-Average.xls

NPCH-7800-P-Polarization.xls

NPCH-7800-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 780
A=B=C [mm]: 15
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-7800-Average.xls

NPCH-7800-P-Polarization.xls

NPCH-7800-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 780
A=B=C [mm]: 20
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-7800-Average.xls

NPCH-7800-P-Polarization.xls

NPCH-7800-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 830
A=B=C [mm]: 10
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-8300-Average.xls

NPCH-8300-P-Polarization.xls

NPCH-8300-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 830
A=B=C [mm]: 15
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-8300-Average.xls

NPCH-8300-P-Polarization.xls

NPCH-8300-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 830
A=B=C [mm]: 20
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-8300-Average.xls

NPCH-8300-P-Polarization.xls

NPCH-8300-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 1064
A=B=C [mm]: 10
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-10640-Average.xls

NPCH-10640-P-Polarization.xls

NPCH-10640-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 1064
A=B=C [mm]: 15
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-10640-Average.xls

NPCH-10640-P-Polarization.xls

NPCH-10640-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 1064
A=B=C [mm]: 20
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-10640-Average.xls

NPCH-10640-P-Polarization.xls

NPCH-10640-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 1300
A=B=C [mm]: 10
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-13000-Average.xls

NPCH-13000-P-Polarization.xls

NPCH-13000-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 1300
A=B=C [mm]: 15
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-13000-Average.xls

NPCH-13000-P-Polarization.xls

NPCH-13000-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 1300
A=B=C [mm]: 20
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-13000-Average.xls

NPCH-13000-P-Polarization.xls

NPCH-13000-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 1550
A=B=C [mm]: 10
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-15500-Average.xls

NPCH-15500-P-Polarization.xls

NPCH-15500-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 1550
A=B=C [mm]: 15
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-15500-Average.xls

NPCH-15500-P-Polarization.xls

NPCH-15500-S-Polarization.xls

Opt_Beamsplitters_.zip

Wavelength Range [nm]: 1550
A=B=C [mm]: 20
Material: BK7
Surface flatness of substrate: ?/4
Beam Deviation: 5
Coating: Hypotenuse surface ; Dielectric multilayer coatingFour surfaces ; Multilayer antireflection coating
Incident angle [°]: 0
Divergence ratio (reflectance : transmittance): 1:1
Laser Damage Threshold [J/cm2] : 0,3
Surface Quality (Scratch-Dig): 20-10
Clear aperture: Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm) Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)Circle that inscribed in a square of 85% of the dimensions(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)

Downloads

OSE-NPCH.pdf

NPCH.xls

NPCH-15500-Average.xls

NPCH-15500-P-Polarization.xls

NPCH-15500-S-Polarization.xls

Opt_Beamsplitters_.zip