Laser safety goggles according to EN 166 and DIN EN 175 with polycarbonate filter and an average daylight transmission of 2 and 16 %.
Sécurité laser
Obturateur avec piège optique dédié pour application laser jusqu'à 20W
Laser safety goggles according to EN 207 with a polycarbonate filter and a daylight transmittance of 34 %.
Laser safety goggles according to EN 207 with a polycarbonate filter and a daylight transmittance of 35 %.
Laserjustierbrillen according to DIN EN 208 with polycarbonate filter and a daylight transmission of 29 %.
Laser safety goggles according to EN 207 with a polycarbonate filter and a daylight transmittance of 15 %.
Laser protection glasses according to DIN EN 208 with polycarbonate filter and a daylight transmission of 10 %.
Les panneaux d'avertissement indiquent l'état des zones ou des espaces à accès restreint fonctionnant avec des laser. Grâce à sa taille compacte, il peut être fixé dans la zone d'entrée.
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 92 %.
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 11 %.
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 15 %.
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 32 - 40%.
Produits populaires
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 µm to 16 µm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay´s ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
